GRS véső C-Max kerek pr. 2,20 mm, hegy 15 mm, félkész termék

GRS véső C-Max kerek pr. 2,20 mm, hegy 15 mm, félkész termék

Az ön ára ÁFA nélkül
16,50 €
Az ön ára ÁFA-val
19,96 €
16.5
022-789
Gyártó
GRS
Hlavní sklad (Strašnice)
Raktáron > 1 db
Prodejna (Soukenická)
Raktáron > 1 db
Kód
18465

 

These C-Max carbide tools from GRS will increase the efficiency of stone-setters and engravers.
GRS véső C-Max kerek pr. 2,20 mm, hegy 15 mm, félkész termékGRS véső C-Max kerek pr. 2,20 mm, hegy 15 mm, félkész termék


These C-Max carbide tools from GRS will increase the efficiency of stone-setters and engravers.


Stone-setters will save time removing the metal between and around stones when using pavé and other setting techniques. Engravers can shape small gravers without having to use a blank that is much too big for the job.

The C-Max carbide gravers with a 2.35-mm shaft are available with diameters rising in 0.2-mm gradations from 0.8 mm to 2.2 mm.

These gravers are specially made for engravers, stone setters, and other craftsmen to combine the ability to hold a precise edge with the toughness needed to cut through many engravable metals. Years of development have produced a tungsten carbide graver with the right blend of hardness and toughness for hand engraving and stone setting applications. C-Max achieves a metallurgical balance like no other carbide. For years, engravers and jewellers have used other carbide gravers that break easily or do not hold a fine edge.

    Érdekelhetné Önt